KX-6 Special

Barrel length: 86 cm (34"); adjustable top rib 12 mm taper flat; highest selectable shot pattern: 70/30 %;
right-handed Monte Carlo "Trap" stock with adjustable comb and "Trap" forearm.
Weight approx. 3.890 g

  • Infinitely variable point of impact adjustment

  • Monte Carlo buttstock with fully Adjustable Comb (drop & cast) and adjustable butt plate

  • Chamber is chrome line

  • Comes in a fitted lightweight case for maximized traveling comfort.

The KX-6 Special

The KX-6 Special

The Krieghoff KX-6 – a single barrel shotgun designed solely for competition. Available with 34" barrels fitted with factory steel choke tubes, the KX-6 has an adjustable rib which allows the point-of-impact to be raised or lowered, a hallmark trait of Krieghoff trap guns! The rib sits above the free-floating barrel which expands lengthwise as it gets hot, no matter how many rounds you shoot. The point of impact remains where you set it and remains unaffected by the heat expansion. Delivered from the factory with a 60/40 POI, the KX-6 can be adjusted to shoot almost a full pattern high. The KX-6 features the Krieghoff adjustable butt plate. Allowing for the adjustment of cast, drop and pitch, for a personalized fit. All of this can easily be done with just one tool, the adjustable comb wrench. The KX-6 length of pullcan be easily adjusted to your personal specifications with the addition of optional pre-fitted 6.5 mm (1/4") spacers. Combined with the adjustable butt plate, obtaining the perfect gun fit has never been easier.

    • Nickeled action finish
    • Adjustable top rib 12 mm taper flat
    • Extended factory steel screw-in chokes, incl. three choke tubes and choke wrench
    • Length adjustable trigger blade
    • Supplied in a gun case
    • Steelshot proof

...built to the requirements of game

  • Barrels & Accessories
    Gauge:
    • 12/76 (3"), chambers are chrome plated
    Barrel length:
    • 86 cm Single Barrel
    Krieghoff Balance System – Barrel weight

    The barrel can be provided with up to three additional 40 g weights underneath the forend, thus making an increase of 120 g at the front end possible.

    Barrel Porting

    For gauge 12 – recoil and muzzle jump is reduced.

    Krieghoff HIVIZ Pro

    Shotgun Sight

    Krieghoff KTW FlushFit Choke

    • Factory screw-in chokes (12)

    It is possible to install these screw-in chokes into fixed choke weapons retroactively. Available in 12, 20, 28 and .410 Gauge. Available in the following versions:

    00=C=Cylinder=0,00 mm
    0=S=Skeet=0,13 mm
    1=IC=Improved Cylinder=0,25 mm
    1+=LM=Light Modified=0,38 mm
    2=M=Modified IM=0,51 mm
    2+=LIM=Light improved Modified=0,64 mm
    3=IM=Improved Modified=0,76 mm
    4=F=Full=0,89 mm
    5=SF=Super Full=1,02 mm
  • Systemvarianten & Gravuren
    Surface finish:
    • Nickel plated receiver finish
  • Stocks & Woodwork

    Stocks & Woodwork

    Woodstock category
    • Category 000 (Standard)
    • Category 001
    • Category 002
    • Category 003
    • Category 004
    • Category C1
    • Category C2
    • Category C3

    A custom fit stock is almost entirely hand made with only minimal pre-machining. Atypical stock dimensions and longer stock lengths generally require a custom fit stock. Further information on request.

     

    Exclusive wood categorys as stock blanks (hand-crafted)

    Due to the high cost of raw materials, wood grades higher than 004 require a custom made stock. The exclusive C-categories are limited. Therfore the availability of them can not be guaranteed.

     

    Left-handed stock
    Hand-crafted stock 
    • Custom made stock with ergonomic grip and finger grooves as well as an adjustable butt plate
    • Buttstock with standard dimensions
    • Buttstock with special dimensions, made to customer’s specifications
    • Forearm with standard dimensions
    • Forearm with special dimensions, made to customer’s specifications, beavertail or semi-beavertail forearm
    Hand-polished stock-finish, grain filled
    • Matt 
    • High gloss
    Monogram plate
    • Inlet into pistol grip cap
    • Steel pistol grip cap fully covering
    Monograms
    • Two letters engraved
    • Two letters engraved in relief style
    • Two letters in silver
    • Two letters in gold
    Krieghoff Balance System – Stock weight for K-80 

    The butt stock can be equipped with a special stock bolt, which is 40 g heavier than a standard stock bolt, and can accept up to fi ve additional 30 g weights. So, the weight of the stock can be increased up to 190 g.

    Adjustable butt plate
    Length of pull adjustment option

    For K-80 and KX-6 – Length of pull can be easily adjusted with the addition of optional pre-fitted 6,4 mm (1/4") spacers. Only in conjunction with adjustable butt plate.