K-80 ProTrap

Barrel length: 76 (30") or 81 cm (32"); adjustable top rib: 10 mm tapered (12 mm with chamfer);
highest selectable shot pattern: 70/30 %; right-handed "ProTrap" stock with "Trap" forearm.
Weight approx. 4.070 g

Sideplates for K-80, available for new guns only
Krieghoff Factory Titanium screw-in chokes
Color case hardened finish of the receiver
Trigger gold plated (including trigger group), steel or titanium
Krieghoff HiViZ Pro Shotgun Sight
Krieghoff Balance System – barrel weights
Custom made stock with ergonomic grip and finger grooves as well as an adjustable butt plate
Krieghoff factory screw in chokes and flushfitted screw in chokes

K-80 – Forever young!

Trap is the oldest and most popular target shooting discipline. The sport is played the world over according to a wide variety of rules. Since 1996 double trap shooting made its first appearance at the Olympics. The K-80’s strengths are especially evident in this disciplines: its perfect adaptability to the technical demands of this sport and the personal wishes of ambitious shooters allows them to perform to the absolute best of their individual abilities. Keen concentration translates into hits that count.

Free-floated barrel set
Adjustable top rib: 10 mm tapered (12 mm with chamfer)
Extended factory screw-in chokes, incl. five steel choke tubes and choke wrench
Nickel plated steel actionHinge screws, top latch, screws and pins are blued
Selectable, mechanical single trigger
Length adjustable trigger blade
Light scroll engraving pattern
Adjustable comb
Standard wood
Stock Finish: SEF (Satin Epoxy Finish)
Supplied in a gun case

General Options
Titan-Options

Titanium trigger, trigger group made of steel
Titanium Front Hanger
Five Titanium screw-in chokes
Titan-Options, black

Titanium trigger, trigger group made of steel, matt black
Titanium Front Hanger, matt black
Five Titanium screw-in chokes, matt black
Titan-Options, gold plated

Titanium trigger, trigger group made of steel, gold plated
Titanium Front Hanger, gold plated
Five Titanium screw-in chokes, gold plated
Matched Pairs

Upcharge of 10% with any order of a matching pair. This includes consecutive numbers and Stocks matching in colour, figure and weight. Both guns are identically balanced.
Krieghoff Balance System

The barrel can be provided with up to three additional 40 g weights underneath the forend, thus making an increase of 120 g at the front end possible.
The buttstock can be equipped with a special stock bolt, which is 40 g heavier than a standard stock bolt, and can accept up to three additional 30 g weights. Thus, making buttstock up to 130 g heavier.

Barrels & Accessories

Gauge:

12/76 (3"), chambers are chrome plated

Barrel length:

76 cm Thermo Stable
81 cm Thermo Stable

Krieghoff Balance System – Barrel weight

The barrel can be provided with up to three additional 40 g weights underneath the forend, thus making an increase of 120 g at the front end possible.

Barrel Porting

For gauge 12 – recoil and muzzle jump is reduced.

Krieghoff HIVIZ Pro

Shotgun Sight

Interchangeable Barrel Sets

K-80 ProTrap, with screw-in chokes
Barrel length: 76 (30“) or 81 cm (32“); adjustable top rib: 10 mm tapered (12 mm with chamfer); highest selectable shot pattern: 70/30 %

Basically, the K-80 can be fitted with all available K-80 barrel sets. However, it should be noted that due to the different levels of top rib, the stock must be adjusted accordingly, or must also be replaced.

Krieghoff KTW FlushFit Choke

Factory screw-in chokes (12)

It is possible to install these screw-in chokes into fixed choke weapons retroactively. Available in 12, 20, 28 and .410 Gauge. Available in the following versions:

00	=	C	=	Cylinder	=	0,00 mm
0	=	S	=	Skeet	=	0,13 mm
1	=	IC	=	Improved Cylinder	=	0,25 mm
1+	=	LM	=	Light Modified	=	0,38 mm
2	=	M	=	Modified IM	=	0,51 mm
2+	=	LIM	=	Light improved Modified	=	0,64 mm
3	=	IM	=	Improved Modified	=	0,76 mm
4	=	F	=	Full	=	0,89 mm
5	=	SF	=	Super Full	=	1,02 mm

Systemvarianten & Gravuren
Surface finish:

Nickel plated receiver finish

Blued receiver finish

Nitrated receiver finish

Color case hardened finish of the receiver
Locks:

Internal lock parts nickel plated

Internal lock parts gold plated, triggers not included

Titanium trigger (including trigger group), gold plated

Titanium trigger; trigger group made of steel, gold plated

Titanium trigger; trigger group made of steel, black
Engraving options
Stocks & Woodwork
Stocks & Woodwork

Woodstock category
- Category 000 (Standard)
- Category 001
- Category 002
- Category 003
- Category 004
- Category C1
- Category C2
- Category C3
A custom fit stock is almost entirely hand made with only minimal pre-machining. Atypical stock dimensions and longer stock lengths generally require a custom fit stock. Further information on request.

Exclusive wood categorys as stock blanks (hand-crafted)

Due to the high cost of raw materials, wood grades higher than 004 require a custom made stock. The exclusive C-categories are limited. Therfore the availability of them can not be guaranteed.

Left-handed stock

Hand-crafted stock
- Custom made stock with ergonomic grip and finger grooves as well as an adjustable butt plate
- Buttstock with standard dimensions
- Buttstock with special dimensions, made to customer’s specifications
- Forearm with standard dimensions
- Forearm with special dimensions, made to customer’s specifications, beavertail or semi-beavertail forearm
Hand-polished stock-finish, grain filled
- Matt
- High gloss
Monogram plate
- Inlet into pistol grip cap
- Steel pistol grip cap fully covering
Monograms
- Two letters engraved
- Two letters engraved in relief style
- Two letters in silver
- Two letters in gold
Krieghoff Balance System – Stock weight for K-80
The butt stock can be equipped with a special stock bolt, which is 40 g heavier than a standard stock bolt, and can accept up to fi ve additional 30 g weights. So, the weight of the stock can be increased up to 190 g.
Adjustable butt plate
Length of pull adjustment option

For K-80 and KX-6 – Length of pull can be easily adjusted with the addition of optional pre-fitted 6,4 mm (1/4") spacers. Only in conjunction with adjustable butt plate.